Construction Dumpster Rental
Phase-based container planning for new builds and remodels, with swaps scheduled before a full box can slow the crew down.
Construction, demolition and heavy-debris containers planned around your build schedule. Right size for each phase, swaps before you stall, and weight limits explained before the first load.
On a job site, debris is a scheduling issue as much as a disposal issue. When the container fills before the replacement arrives, framing stops, drywall scrap piles up on the ground, and a clean site becomes a hazard. Longmont Dumpster Services works with general contractors, remodelers, roofers, and owner-builders across Bray, OK to prevent exactly that.
We start by learning the phases of your project. Tear-out and demolition produce heavy, fast volume. Framing produces bulky, light offcuts. Drywall and finish work produce dense scrap and a lot of packaging. Each phase suits a different container, so we build a plan that changes as your project does. That approach keeps you from paying for capacity you are not using and from running short when the pace picks up.
Weight is the other half of the conversation. Concrete, brick, tile, and shingles fill a container's weight allowance long before they fill its volume. We tell you which materials need a smaller box or a marked fill line, and we explain the allowance in your quote before delivery. That is the simplest way we know to keep overage charges off your invoice.
Our drivers set containers where your crew can load them efficiently while leaving room for material deliveries and equipment. If a container has to sit in the right of way, we let you know whether Bray, OK is likely to require a permit so your inspections stay clean.
The rentals below cover the work contractors and serious renovators bring to us most: construction phases, demolition, heavy paving material, and the large containers that handle bulk. Each page lays out typical dimensions, what loads well, and where weight becomes the limiting factor.
Phase-based container planning for new builds and remodels, with swaps scheduled before a full box can slow the crew down.
Heavy masonry in small containers with fill lines, bulky debris in larger ones. The split that keeps demolition safe and on budget.
Six to eight pickup loads with a rear swing door on many units. The steady workhorse for framing, drywall, and multi-room remodels.
Taller walls on a similar footprint for whole-floor renovations, additions, and siding or window replacement across an entire home.
Maximum volume for bulky, lighter debris on commercial sites and large interior demolitions. Sized for volume, never for masonry.
Our 30 and 40 yard options side by side, with guidance on site surface, truck approach, and loading order for big jobs.
Heavy-material containers for driveway and lot tear-outs, with fill lines that keep loads within safe transport weight.
Brush, limbs, sod, and lot-clearing debris for landscape and site prep work, with tips for keeping green waste clean.
Choosing between sizes comes down to volume, weight, and site space. If you are between two options, describe the job and we will give you a straight recommendation. The rest of our rental types are listed below the featured containers.
A predictable process means fewer surprises on site. This is the sequence we follow on construction and demolition rentals.
Tell us the scope, the materials, and the timeline. We ask about heavy debris specifically because it changes the container plan.
We recommend container sizes for tear-out, framing, and finish work, plus a swap rhythm based on your pace.
We review truck approach, overhead clearance, surface conditions, and whether street placement could need a permit.
Container size, rental period, and weight allowance are stated in writing before anything is scheduled.
The driver sets the container where your crew can load it efficiently without blocking deliveries or equipment.
Heavy material stays below fill lines, bulky pieces go in first, and the load stays level with the rim for safe transport.
Call when a container is about three quarters full so the replacement arrives before work is interrupted.
The last container leaves and your site is ready for inspection, handoff, or the next phase.
Contractors and serious renovators on what it is like to run a site with our containers.
“They asked about every phase before the first drop. We never had framing scrap on the ground once the walls went up.”
Tom B., General contractor“The fill line conversation on our slab removal saved us real money. Small box for the concrete, 30 yard for everything else.”
Frank W., Demolition project“Our driveway replacement needed two heavy-debris containers. Both swaps landed exactly when the crew needed them.”
Hector G., Paving jobThe practical details that decide whether a site rental runs smoothly.
We estimate how quickly each phase fills a container and schedule swaps around that pace. The plan adjusts as the project moves, and you can always call for an extra swap.
Concrete, brick, asphalt, and shingles exceed safe transport weight long before a large container looks full. Smaller containers with fill lines keep loads legal and help avoid overage charges.
Most mixed construction debris can share a container. Heavy masonry often needs its own smaller box to stay within weight limits.
A firm, level surface, a straight approach for the roll-off truck, and overhead clearance. We review your site on the call.
Street or right-of-way placement in Bray, OK may require a permit. We tell you whether one is likely before scheduling delivery.
Hazardous materials, fuels, liquid paint, batteries, tires, and asbestos. Asbestos must be removed by licensed professionals before demolition debris is loaded.
Your quote states the allowance. If a load exceeds it, an overage is charged based on the actual weight recorded at the disposal facility.
Yes. Homeowners managing their own additions and remodels get the same phase planning and placement review as contractors.